Overclocking The Bitcoin ASICMiner Blade V2 (Green Board) to ~13.2GH in 30 Minutes or Less
Many of you probably have recently purchased an ASICMiner Blade V2 10.7GH and have been wondering what the easiest way to over clock it might be. I have spent a bit of time working on a solution that would be easy to do with basic soldering skills and tools. One drawback of earlier overclock kits was the need for a hot air station to remove the stock 12mhz oscillator. With this method it is no longer necessary to remove the stock oscillator with a hot air station. The new oscillator is simply placed on the un-populated pads and enabled for a higher hash rate. What you will need: A basic soldering Iron, some thin solder and braided desoldering wick. I have added Radio Shack links below for reference or examples, but these items can be sourced from anywhere you want. These can also be found on eBay if you don't want to leave the house. Soldering Iron Desoldering Braid Rosin Core Solder (.032 or smaller) Solder Paste Magnification Visor I would suggest w